A light weight 2-stroke mobile unit with high volume water flow is suitable for a range of industries. 

Features and Benefits: 

• 2050 L/min @6 Bar 1800 L/min @8 Bar 1500 L/min @10 Bar 
• The lightest & the most compact model in its class. 
• The best suction performance in its class (9m / 30ft). 
• Easy & smooth start by battery-less EFI. (Electric Fuel Injection). 
• 90 degree swinging twin outlets 

Quick priming (three metres in six seconds) is one of the VC 72AS’s many features. This compact and lightweight unit can be carried by two fire fighters and will fit existing locker space for this type of pump. Both the engine and pump are designed and developed specifically for fire pumps by Tohatsu, ensuring higher pump performance for its class. 

Features and Benefits: 

• Pump performance: 1700 litres per minute at 400 KPa / 1300 litres per minute at 800 KPa / 950 liters per minute at 1000 KPa 
• Includes battery charger, floodlight projector and plastic toolbox 
• Lightweight, anti-corrosive aluminium-alloy pump casings and engine 
• Gasoline and engine oil are mixed automatically at a precise ratio to engine speed 
• Electric starter and backup recoil starter 

Speed is of the essence when fighting fires and these high-performance pumps can be relied on to start quickly in all temperature conditions. Clever design enables rapid water priming in emergency situations and for the delivery hose’s direction to be easily changed without moving the pump unit. Either unit can be carried in a backpack over short distances or mounted on a truck. 

Features and Benefits: 

• Takes up less space than similar fire equipment 
• Dry weight: 40kg (V20E), 46kg (V20ES) 
• Pump performance: 650 litres per minute at 500 KPa / 400 litres per minute at 700 KPa 
• Lightweight, anti-corrosive aluminium-alloy pump casings and engine 
• Stainless steel fuel tank 
• One-touch fuel drainage from carburettor 

Lower exhaust emissions and increased fuel economy make the VF53AS environmentally friendly. Its low-noise output means it is also easier to work around and does not drown out spoken communication. State-of-the-art 4-stroke 3-cylinder engine technology ensures maximum reliability for fighting fires in any season. Quick priming enables the pump to prime three meters in only three seconds. 

Features and Benefits: 

• Pump performance: 1200 litres per minute at 600KPa / 950 litres per minute at 800 KPa / 700 litres per minute at 1000 KPa 
• Less vibration than other similar fire pumps 
• Electrically controlled fuel injection 
• Engine overheat protection sensor 
• Includes battery charger and tool kit 

Speed is of the essence when fighting fires and these high-performance pumps can be relied on to start quickly in all temperature conditions. Clever design enables rapid water priming in emergency situations and for the delivery hose’s direction to be easily changed without moving the pump unit. Either unit can be carried in a backpack over short distances or mounted on a truck. 

Features and Benefits: 

• Takes up less space than similar fire equipment 
• Dry weight: 40kg (V20E), 46kg (V20ES) 
• Pump performance: 650 litres per minute at 500 KPa / 400 litres per minute at 700 KPa 
• Lightweight, anti-corrosive aluminium-alloy pump casings and engine 
• Stainless steel fuel tank 
• One-touch fuel drainage from carburettor

Maintaining the tradition while moving technology forward: the MARK-3 ® Watson Edition plugs right into your existing MARK-3 ® water-moving systems. It will set a new benchmark of excellence for high-pressure fire pumps in the wildland firefighting community for generations to come. 

Features and Benefits: 

• Quick-release clamp and detachable pump end for minimal equipment downtime  
• Unique blister resistant mechanical rotary seal to prolong pump end longevity  
• Sealed bearing to eliminate pump end greasing in the field  
• Aluminum alloy pump components and anodized parts for lighter weight and greater resistance to corrosion 

Instantly converting any ute into an extremely mobile fire truck, the WATERAX RANCHER® lightweight skid unit is rugged, yet affordable. Powerful, yet easy to operate.

The RANCHER® is a professional firefighter-grade system that comes with top-of-the-line components including the powerful, durable MINI-STRIKER® pump and the proven Hannay hose reel.

The RANCHER® provides the strength and performance you need to move water. It is ideal for rapid intervention in remote areas that can’t easily be reached by larger vehicles, and comes with 65- or 125-gallon tank capacity.

The MINI-STRIKER ® pump pairs a reliable single stage pump end with the Honda 4-stroke 2.1 HP engine.

Extremely portable and lightweight this mini powerhouse performs well when used by itself or in tandem with other pumps, and is a very popular choice for entry level skid applications. 

Features and Benefits: 

• Lightweight aluminum alloy pump components 
• Portable and compact 
• Reliable 4-stroke Honda engine 
• Robust carrying handle 
• Integrated fuel tank 
• Optional turnkey cart system 

Honda’s powerful WB30XT is a 3" portable pump with a 23m head that delivers a maximum capacity of 1100 litres per minute.

Drawing on decades of engineering advancements, the Honda 4-Stroke GX160 engine that powers the WB30XT ensures easy starting, functionality, outstanding fuel economy, low emissions and long-lasting durability. 

Features and Benefits: 

• Powerful output with a Honda GX160 engine 
• Cast iron volute reduces case wear 
• Oil alert system shuts off engine when low oil is detected 
• Heavy duty full frame for added protection