Various aluminium collecting and dividing breeches are available to suit your needs. There are solutions for both instantaneous and forestry hose lines in both controlled and uncontrolled styles. Collectors can also be supplied with a clapper to prevent back flow if desired. 

Features and Benefits: 

• Precision machined and made from LM25 Alloy
• Suction inlets and outlets with 70mm male IN couplings and Female IN Single Lug couplings
• Couplings manufactured to SNZ4505 Standard
• Powder coated finish

Features and Benefits: 

• Male IN 70mm x 1 & 1/2" FBSP - (P/N) 
• Male IN 70mm x 1 & 1/2" MBSP - (P/N) 
• Male IN 70mm x 1 & 1/2" MBSPT - (P/N) 
• Male IN 70mm x 2" FBSP - (P/N) 
• Male IN 70mm x 2" MBSP - (P/N) 
• Male IN 70mm x 2" MBSPT - (P/N) 
• Male IN 70mm x 2 & 1/2" FBSP - (P/N) 
• Male IN 70mm x 2 & 1/2" MBSP - (P/N)  
• Male IN 70mm x 2 & 1/2" MBSPT - (P/N) 
• Male IN 70mm x 3" MBSP - (P/N) 
• Male IN 70mm x 3" FBSP - (P/N) 
• Precision machined and made from LM25 Alloy
• Complies with SNZ PAS 4505-2007 / 70mm Instantaneous

Features and Benefits: 

• Male and Female 70mm Instantaneous couplings with 70mm internally feruled hose tails
• Precision machined and made from LM25 Alloy
• Complies with SNZ PAS 4505-2007 / 70mm Instantaneous

Features and Benefits: 

• Male and Female 70mm Instantaneous couplings with 70mm internally feruled hose tails
• Precision machined and made from LM25 Alloy
• Complies with SNZ PAS 4505-2007 / 70mm Instantaneous

Features and Benefits: 

• Female 70mm Instantaneous coupling with double pull release handles
• 2 and 1/2" Male BSP thread at base
• Heat treated
• Precision machined and made from LM25 Alloy
• Complies with SNZ PAS 4505-2007 / 70mm Instantaneous

Features and Benefits: 

• Female 70mm Instantaneous coupling with release bar
• 2 and 1/2" Female BSP thread at base
• Heat Treated
• Precision machined and made from LM25 Alloy
• Complies with SNZ PAS 4505-2007 / 70mm Instantaneous

Various aluminium collecting and dividing breeches are available to suit your needs. There are solutions for both instantaneous and forestry hose lines in both controlled and uncontrolled styles. Collectors can also be supplied with a clapper to prevent back flow if desired. 

Features and Benefits: 

• Precision machined and made from LM25 Alloy
• Suction inlets and outlets with 70mm male IN couplings and Female IN Single Lug couplings
• Couplings manufactured to SNZ4505 Standard
• Powder coated finish

Manufactured in New Zealand from high impact strength polymer these nozzles can be adjusted easily and smoothly with a twist of the wrist for a strong jet throw, cone spray, or fog pattern.

They feature an overmoulded black polyurethane protective bumper to extend the life and prevent damage to expensive marine decking and hardware.

They are the ideal high-pressure nozzles for wash down and marine fire protection on boats and dockside. 

Features and Benefits: 

• Typical flowrate of up to 300 Litres/min
• Approved for use with fire hoses on surveyed vessels in New Zealand
• Overmoulded black polyurethane protective bumper
• Thread size 1½" BSP
• 4 sizes of tail options available (19mm, 25mm, 32mm, and 38mm)
• Available with either a Composite or Brass Valve inner

Standpipes have been designed and manufactured to meet New Zealand market requirements. They are constructed of alloy and bronze cast. Their design makes repair and replacement of parts simple. 

Features and Benefits: 

• Quality aluminium cast swivel head - powdercoat finish
• Double Single Lever Adaptors

Strainers for end of suction hoses fitted with Storz, Camlock, LRT or Forestry fittings. Comes in a variety of sizes and connections. 

Features and Benefits: 

• Precision machined and made from LM25 Alloy
• Couplings manufactured to SNZ4505 Standard
• Female 4" British Round Thread with a aluminium basket strainer